ECopy ShareScan 4.2 Installation And Setup Manual - page 52

42  

|

  Reference: Configuring the system

To grant access to other Services Managers:

1

In the console tree, select the name of the Services Manager and then click the 

Display 

Security Options

 button on the console toolbar.

The 

Security Options

 window opens.

2

Select the 

Enable

 option. By default, this option is disabled.

3

Select the 

Allow addition of devices and connector profile publishing

 option.

4

In the address field, enter the IP addresses of the Services Managers to which you want to 

grant access and then click 

Add

.

The addresses appear in the 

Manager IP addresses

 list.

5

Repeat step 4 until you have added the addresses of all the Services Managers to which you 

want to grant access. Those Service Managers will have the right to add or acquire devices 

managed by this Services Manager or to publish connector profiles to it.

6

Click 

OK

.

To remove access rights from a Services Manager:

1

In the console tree, select the name of the Services Manager and then click the 

Display 

Security Options

 button on the console toolbar.

The 

Security Options

 window opens.

2

In the 

Manager IP addresses

 list, select the addresses and then click 

Remove

.

3

Click 

OK

.

The system prompts you to confirm that you want to remove the selected IP addresses.

4

Click 

OK

.

Note:

Even if addresses appear in the list of allowed Managers, access by those Services Managers 

will be blocked if you select the Prevent addition of devices and connector profile publishing 

option.