ECopy ShareScan 4.2 Installation And Setup Manual - To Add Target Devices:
eCopy ShareScan
®
Installation and Setup Guide
|
185
6
Select the connector profiles that you want to publish and then click
OK
.
The
Create Profile
window opens.
7
Select additional connector profiles that you want to publish. You can publish up to nine
connector profiles to any device.
8
When you have finished selecting the connector profiles to include in the group, click
OK
.
The
Publish Connector Profiles
window lists the new profile. The table specifies the
profile name and the number of connector profiles included in it.
To add target devices:
1
In the console tree, right-click
Devices
and then select
Publish connector profiles
.
The
Publish Connector Profiles
window opens.
2
Click
Manage
.
The
Manage window
opens.
Note:
Although Copy is not supported on ScanStation devices and Fax via Print is not supported on
devices running ShareScan Embedded software, the Publish function does not keep you from
selecting these connectors. The Publish function does not know what devices will use the
group of profiles you are creating.