ECopy ShareScan 4.2 Installation And Setup Manual - Device Worksheet
242
|
Reference: Installation environment
Device worksheet
Copy and complete the worksheet below for each eCopy-enabled device that you plan to use with
ShareScan.
TABLE 63. Device worksheet
Notes
Device
Example
Model
eCopy-enabled device.
Location
Physical location of the device.
1-B32
Language
English
IP address (or DHCP)
Domain-based networks: eCopy recommends
that you use static IP addresses.
Workgroups: You must use static IP addresses.
10.10.10.68
Gateway address
Leave blank unless required by other
applications.
Primary DNS server
Domain-based networks: Not required.
However, if you do not specify a DNS server, the
Services Manager PC must have a static IP
address.
Workgroups: Leave this field blank.
10.10.10.10
Secondary DNS server
Leave blank.
Domain name
Enter a name, if applicable.
ecopy