Webasto Thermo Top C Installation Instructions Manual - page 42
Thermo Top C, E
Peugeot 307
42
RFK 2.0 l gasoline
NOTE:
Position hose clamps so that no other hose can be
damaged!
- Loosely pre-assemble the rubberized 29mm tube
clamps (4.5) with the 15 mm spacer sleeve (2),
M6x30 bolt, body washer and flanged nut on the
hole to the left of the cooler as shown in the figure.
- Cut off three edge protection pieces (1,3,6) from the
enclosed edge protection.
- Slide on and position the three edge protection
pieces according to the figure.
- Bend the enclosed fastening strip according to the
figure.
- Insert the M6x20 screw (4) according to the figure
with the body washer in the oblong hole on the bend
fastening strap (5).
- Loosely pre-assemble the rubberized 34mm tube
clamps (1,3) according to the figure with the M6x20
bolt and M6 flanged nut.
- Drill a Ø 6.5mm bore hole at position (1) in the cross-
piece according to the figure.
- Fasten the rubberised tube clamp (2) with the
M6x20 bolt and the flanged nut to the cross
traverse.
107
1
2
3
4
5
6
108
60mm
30°
109
5
4
1
2
3
110
2
1