Webasto Thermo Top C Installation Instructions Manual - page 45
Other manuals for Thermo Top C:
Operating Instructions, Operating Instructions, Installation Instructions Manual, Operating And Maintenance Instructions, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation instructions manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Operating Instructions, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Documentation, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Documentation, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual, Installation Instructions Manual
Manual is about: Typ BW50 (Benzin/Petrol/Bensin) Typ DW50 (Diesel)
of
55
Peugeot 307
Thermo Top C, E
45
- Run the 1,000mm water hose (1) and 920 mm long
water hose (2) in the engine compartment as shown
in the figure.
- Connect the 920mm long water hose (4) and 880
mm long water hose (5) with the 20/20 connecting
pipe and hose clamps.
- Connect the 1,000mm long water hose (3) and
970mm long water hose (1) with the 20/20
connecting pipe and hose clamps.
- Cut down the enclosed cloth fuel hose (6) to approx.
35mm.
- Slide the cloth fuel hose (6) on the original vehicle
bolt.
- Insert the spacer bracket (2) according to the figure.
- Align all water hoses.
- Tighten all rubberised tube clamp.
- Align all rubber profiles.
- Secure all water hoses with cable ties.
119
1
2
120
3
2
1
5
4
6