Oce Arizona 600 User Manual - page 104
of
148
Océ | Printer Maintenance
5-14
11.
While wearing a pair of butyl rubber gloves, wipe down any ink that may have
accumulated along the surface of the Teflon sheet. Use a lint-free cloth saturated with
cleaning fluid (for 5500/6600-series inks) or capping fluid (for 440-series inks).
12.
Install the new blotting cloth roll on the lower hub, and capture the left end with the
lever arm. Install the empty notched take-up core on the upper hub with drive pins,
and capture the left end with the lever arm (see Figure 5-12).
Figure 5-12 Blotting Cloth Hubs
13.
Feed the leading edge of the cloth from the bottom of the roll up and around the
back side of the Teflon sheet and foam pad (see Figure 5-13).
Figure 5-13 Feeding the Cloth (Step 1)
Upper
Hub
Lower
Hub