Oce Arizona 600 User Manual - page 93
Operator Maintenance Schedule
12/9/04
5-3
Carriage Rails
Wipe clean with a lint-free cloth and 91% or
higher isopropyl alcohol only. Use a lint-free
cloth saturated (but not dripping) with isopro-
pyl alcohol (see Figure 3-12 on page 3-10).
Once a week
Cleaning Fluid (For
5500/6600-Series
Inks) or Capping
Fluid (For 440-Series
Inks)
Refill the bottle when low or as indicated by
control panel messages. (See “Cleaning Fluid
or Capping Fluid Container and Waste Con-
tainer” on page 2-2.)
As required
Drip Roller
Wipe clean with a lint-free cloth and cleaning
fluid (for 5500/6600-series inks) or capping
fluid (for 440-series inks) (see Figure 3-12 on
page 3-10).
Daily
Encoder Strip
Wipe clean with a lint-free cloth and 91% or
higher isopropyl alcohol only. Take extra care
to not bend the strip when cleaning.
Once a month
Ink Supply Bottles
Replace when empty or as indicated by con-
trol panel messages. (See “Ink Supply
Changes” on page 2-2.)
As required
Ink Waste Container
Empty when control panel message indicates
the container is full. Follow ink MSDS require-
ments for disposal. (See “Cleaning Fluid or
Capping Fluid and Waste Bottles” on page 2-
2.)
As required
Interior and Exterior
Wipe surfaces clean with a lint-free cloth and
91% or higher isopropyl alcohol only.
Once a week
Left and Right End
Caps
All doors must be closed or secured at all
times to capture fumes and heat.
Always
Media Drive Roller
Wipe clean with a lint-free cloth and 91% or
higher isopropyl alcohol only.
Wipe clean with a sponge/scrubber and 91%
or higher isopropyl alcohol only. (See “Clean-
ing the Media Drive Roller” on page 5-5.)
Every media
change
Weekly
Media Encoder Turn
Bar
Wipe the cylindrical-shaped steel bar clean
with a lint-free cloth and 91% or higher isopro-
pyl alcohol (see Figure 3-11 on page 3-9).
Every media
change
Description
Procedure
Frequency