Oce Arizona 600 User Manual - Invalid Bar Code

Océ | Control Panel

4-30 

This barcode is requested before each print job until a valid Océ ink barcode is 

scanned.

6.

You then see:

INK LEVELS

color: xx% remain

Use the +/- button to select a color.

7.

Press ACCEPT or MENU. You then see:

INK LOW LEVEL

Ink low warning when: xx% remaining

The default value is 35%.

When the ink level decreases to the warning level, such as 35%, of the bottle 

volume, Ink Low warning indicators appear on the operator control panel. If the 

ink bottle is allowed to empty, the printed image can be ruined by ink drainage 

from the juice boxes. Use the +/- button to adjust the setting. The minimum 

recommended setting is 10%.

8.

Press ACCEPT or MENU. You then see:

MAIN MENU

ink menu

Invalid Bar Code

If an invalid bar code is detected, the following message is displayed:

Invalid barcode

press ACCEPT to continue

An invalid bar code can occur from an incorrect reading by the scanning wand.

Press the ACCEPT button. The menu returns to step 3 (see page 4-28). You then see: 

Scan barcode (color)

Accept->Manual Entry

Warning:

Océ Display Graphics Systems accepts no liability when non-Océ Display 

Graphics Systems ink is used. Customers voluntarily using non-Océ 

Display Graphics Systems ink assume all risk of damage that might 

result. Customers agree to waive any claims or rights they may otherwise 

have against Océ Display Graphics Systems or its agents for damage 

and/or loss of business resulting from use of non-Océ Display Graphics 

Systems ink.