Oce Arizona 600 User Manual - Copies/reprints

Océ | Control Panel

4-4 

•

ERROR - Indicates a printer problem has occurred.

•

MEDIA LOW - Indicates that media supply is below 50 feet.

•

ONLINE - Indicates four status conditions:

- Solid, ready to receive a print job or keypad input

- Slow blink, printing

- Fast blink, receiving a print job

- Off, offline

0.2

Navigating from the Main Menu

Four main control panel submenus control specific functions on the printer: Copies/

Reprints, Operator, Ink Menu, and Configure I/O.

The entire menu structure can be printed using the Print Menu Tree function (see "Print 

Menu Tree" on page 4-13).

0.3

Copies/Reprints

This menu (see "Copies/Reprints Menu" on page A-2) controls the number of copies and 

specifies the spacing between copies made during each print job. You can also reprint copies 

of a previous printed image. An on-board hard drive enables multiple images to be saved 

and accessed through the control panel without reprocessing and resending the print from 

the processing workstation.

0.3.1

Reprint Copies of a Previously Printed Image

Copies of a previously printed image can be reprinted using the following steps:

1.

Navigate to:

MAIN MENU

copies/reprints

2.

Press the ACCEPT button. You then see:

REPRINTS: [ 0 ] filename

speed, overlap, dir, res x res, width x length

Use the +/- buttons to select a previously printed image.

3.

Press ACCEPT. You then see:

REPRINTS

position: (right, center, or left)

Use the +/- buttons to select the required position.