Oce Arizona 600 User Manual - page 105
of
148
Maintenance Cloth Station
12/9/04
5-15
14.
Pull the leading edge of the cloth across the Teflon sheet and down until it reaches
the take-up core (see Figure 5-14). Remove the paper backing off the leading edge of
the plastic strip attached to the cloth so it can be taped evenly to the empty take-up
core.
Figure 5-14 Feeding the Cloth (Step 2)
15.
Align the plastic strip with the right ed of the core and attach the sticky strip
horizontally across the empty core (see Figure 5-15).
Figure 5-15 Attach the Cloth to the Take-up Core
16.
Rotate the supply roll to take out the slack in the cloth path. The station will
automatically raise and lock into the correct position at the beginning of the next
print.