Oce Arizona 600 User Manual - Opening The Door
Océ | Media System
3-2
3.2.1
Opening the Door
The first step in loading media is to open the IR-heater door on the front of the printer.
Begin by releasing the black clips on both sides of the door (see Figure 3-1) and
(see Figure 3-2).
Figure 3-1 Left Clip Closed
Figure 3-2 Left Clip Open
Grasp the door using the two handles and pull the door towards you and down.
3.2.2
Closing the Door
To close the door, grasp the door using the two front handles and pull the door up and away
from you. Secure the black clips on each side of the door.
3.2.3
Media Support System
Océ Display Graphics Systems strongly recommends that two people change supply and
take-up media rolls. The customer’s media support system should be able to support the
weight of a full media roll. Position the media support system as close as possible to the
Handle
Handle