Oce Arizona 600 User Manual - Media Types: Other

Roll-to-Roll Media Installation 

12/9/04

3-13

18.

Press ACCEPT. You then see:

MEDIA MENU

hor. margins: (0.2” - 4.0”)

Use the +/- buttons to adjust the horizontal margins.

19.

Press ACCEPT. You then see:

MEDIA MENU

ver. margins: (0.2” - 4.0”)

Use the +/- buttons to adjust the vertical margins.

Press ACCEPT. You then see:

Sizing media

please wai

t

The printer sizes the media. If an error occurs, check the alignments along the 

media path from the supply to the take-up core.

If no error occurs, you then see:

Stabilizing media

please wait

When stabilizing is complete, printer status information is displayed.

Media Types: Other

Selecting OTHER enables additional menus for manual media setup. When changing 

values, holding the +/- buttons continuously increments or decrements the value repeatedly. 

Follow the steps below for this media type option:

1.

You then see:

MEDIA MENU 

Other

2.

Press the ACCEPT button. You then see: 

MEDIA MENU 

thickness: (2.00 - 30.00) mil

The range for thickness values is 2.00-30.00 mils. The media thickness is typically 

on the media container label, if any. The media thickness changes by .05 mils.

Use the +/- buttons to increment or decrement the thickness setting.

3.

Press ACCEPT. You then see:

MEDIA MENU 

takeup core OD: (3.10" - 4.00")