Oce Arizona 600 User Manual - Long Purge Nozzles

Océ | Control Panel

4-18 

Long Purge Nozzles  

A long purge is the same as a low purge, except a nozzle print never follows the long purge. 

Follow these steps to perform a long purge:

1.

Navigate to:

MAINTENANCE 

spit heads

2.

Press the MENU button. You then see:

MAINTENANCE 

long purge nozzles

3.

Press the ACCEPT button. You then see:

INKS TO LONG PURGE 

C  M  Y  K  LM  LC

Use the +/- buttons to select the color or colors to long purge.

4.

Press ACCEPT to begin purging. You then see:

Cleaning Nozzles

please wait

Pump Cleaning Fluid/Capping Fluid

During normal operation, cleaning fluid (for 5500/6600-series inks) or capping fluid (for 

440-series inks) is automatically pumped to the sponges in the capping station. Follow these 

steps to perform a manual pumping of cleaning fluid (for 5500/6600-series inks) or capping 

fluid (for 440-series inks):

1.

Navigate to:

MAINTENANCE 

long purge nozzles

2.

Press the MENU button. You then see:

MAINTENANCE 

pump solvent

3.

Press the ACCEPT button to pump cleaning fluid (for 5500/6600-series inks) or 

capping fluid (for 440-series inks). You then see:

Warning:

Media must be installed prior to performing this function.