Oce Arizona 600 User Manual - Color Bars

Océ | Control Panel

4-12 

Color Bars

The Color Bars menu prints a set of color bars. The eleven color bars start with Light 

Magenta and end with Black. Use the color bars to diagnose and calibrate printer inks for 

optimal performance. Follow these steps to print the color bars:

1.

Navigate to:

TEST PRINTS 

nozzle print

2.

Press the MENU button twice. You then see:

TEST PRINTS 

color bars

3.

Press ACCEPT. You then see:

COLOR BARS 

overlap: (2, 4, or 8-pass)

Use the +/- buttons to select the number of passes.

4.

Press ACCEPT. You then see:

COLOR BARS 

dir: (bidir LR, unidir LR)

Use the +/- buttons to set the write direction.

5.

Press ACCEPT. You then see:

COLOR BARS 

position: (left, center, or right)

Use the +/- buttons to set the required position.

6.

Press Accept. You then see:

COLOR BARS 

print width: (8.0" - 70.0")

Use the +/- buttons to set print width (8.0 in. - 70.0 in.).

7.

Press ACCEPT. You then see:

COLOR BARS 

(1 - 10) pass

Use the +/- buttons to select the number of passes.

8.

Press ACCEPT. The Color Bars begins printing.