Oce Arizona 600 User Manual - Printer Filters

Océ | Printer Maintenance

5-18 

5.8

Printer Filters

Filter type, part number, and dimensions are documented on labels near the filter locations. 

Replacement filters are available for purchase from Océ. Contact an Océ supplies 

representative if you have any questions or for more information on these filter types and 

service life.

5.8.1

Purolator Hi-40 Filters

System Filters

Four air system filters are required on the Arizona 600 printer. Each filter should be 

inspected every two months. The filter should be replaced when the filter fabric begins to 

discolor from the original condition or once every twelve months, whichever comes first. 

They are located at the rear of the printer just below the electronic bay doors

. 

The air system 

filter (Dim: 9 1/2 in. x 16 1/2 in. x 1 in.) replacement is OIN #3011570041. These filters 

easily slide in/out from underneath the printer (see Figure 5-17). 

Figure 5-17  Purolator Hi-40 System Filters

Note:

An airflow direction arrow is printed on the side of the filter. The arrow should 

be pointing up when installed because the air is being drawn up into the printer.