Oce Arizona 600 User Manual - Print Menu Tree

Operator

12/9/04

4-13

Print Menu Tree

The Print Menu Tree menu prints the entire menu tree structure. Follow these steps to print 

the menu tree:

1.

Navigate to:

TEST PRINTS 

nozzle print

2.

Press the MENU button three times. You then see:

TEST PRINTS

print menu tree

3.

Press ACCEPT. The Menu Tree begins printing.

0.4.3

Maintenance

The Maintenance menu (see "Maintenance Menu (Part 1)" on page A-5) contains several 

maintenance submenus. These maintenance submenus may need to be performed 

periodically in addition to the automated maintenance that occurs without direct operator 

intervention. Refer to the "Operator Maintenance Schedule" on page 5-2 for additional 

information and routine maintenance required on the Arizona 600 printer.

Several maintenance functions can be selected from the front panel menus when the 

machine is idle or while printing. 

For purge functions, a list of colors to be purged is presented for selection, for example:

INKS TO LOW PURGE 

C  M  Y  K  LM  LC

With this initial setting, all six colors are designated to be purged.

The underscore indicates the color that is the current active item of the list of colors. 

Pressing + moves the underscore to the right. Pressing - replaces the letter with a bar. For 

example, when C is underscored, pressing - changes the list to:

    M  Y  K  LM LC

If you press ACCEPT at this setting, the color cyan is excluded from the purge.

The following setting purges the colors magenta, yellow, black, and light magenta:

    M  Y  K  LM      

Warning:

Media must be installed prior to performing these functions.