Oce Arizona 600 User Manual - page 38
of
148
Océ | Media System
3-10
printer and verify that the left and right edges of the media are straight on the core
and that no coning or sliding has occurred.
Figure 3-12 Wrap Media Around the Take-up Core
8.
Align the media with the right side take-up core edge, then tape along the core in five
places. Tape the leading edge of the media to the core at the right side, the far left side,
and in three more places equally spaced in the middle (see Figure 3-13)
.
Figure 3-13 Align and Tape the Media
Take-up
Dancer
Take-up
Core