Oce Arizona 600 User Manual - Take-Up Roll Reattachment

Océ | Media System 

3-16 

When stabilizing is complete, printer status information is displayed.

3.3.3

Take-up Roll Reattachment

Follow these steps to remove a partial take-up roll and reattach media to a new empty take-

up core:

1.

Press the Load Media button. You then see:

Load Media 

new supply roll?

2.

Press the Menu button. You then see:

Load Media 

reattach takeup?

3.

Press the ACCEPT button. You then see:

Use +/- keys, attach

takeup, press ACCEPT

The take-up dancer moves automatically up and out of the way.

4.

To unload the partial roll of images, gently open the front door completely.

5.

Cut the media below the take-up dancer and remove the take-up mandrel from the 

printer (see Figure 3-15).

Figure 3-15  Cutting Media Above Take-up Dancer 

Note:

Avoid cutting into the media drive roller or the Teflon coating on the take-

up dancer.

Drive Roll

Take-up

Dancer

Take-up

Mandrel