Oce Arizona 600 User Manual - Low Purge Nozzles.

Océ | Control Panel

4-16 

3.

Press ACCEPT. You then see:

Inks to High Purge 

number of purges: (1-10)

Press +/- to select the number of purges to be performed (no more than two are 

recommended).

4.

Press ACCEPT. You then see:

Inks to High Purge 

C M Y K LM LC

Use the +/- buttons to select the required color or colors to high purge.

5.

Press ACCEPT to begin purging. The 

Cleaning Nozzles please wait

 and 

Printing

Nozzles Test please wait

 messages are displayed during the purge process.

Low Purge Nozzles.

A low purge is the same as a high purge, except a lower pressure is used. No multi-purge 

capability is available with the low purge. A blot at the maintenance station is performed 

after the purge to clean the nozzle plate. If the printer was idle, a nozzle print follows the 

blot. Follow these steps to perform a low purge:

1.

Navigate back to: 

MAINTENANCE 

high purge nozzles

2.

Press the MENU button. You then see:

MAINTENANCE

low purge nozzles

3.

Press the ACCEPT button. You then see:

INKS TO LOW PURGE 

C  M  Y  LM  LC

Use the +/- buttons to select the required color or colors to low purge.

4.

Press ACCEPT to begin purging. The 

Cleaning Nozzles please wait

 and 

Printing 

Nozzles Test please wait

 messages are displayed during the purge process.

Warning:

Media must be installed prior to performing this function.