Oce Arizona 600 User Manual - page 50
of
148
Océ | Media System
3-22
12.
Roll the external media take-up unit (EMTU) into position at the side of each IR
door rest and against the front of the printer, ensuring the EMTU is square to the
printer. Lock the front wheels (see Figure 3-21).
Figure 3-21 Correct Position of the Left Side of the EMTU
13.
Load an empty take-up core the same width as the supply media. Adjust the EMTU
hubs left to right as required to align the edges of the core with the edges of the media
coming out of the printer, and secure the hubs by tightening the knobs.