Oce Arizona 600 User Manual - page 68
of
148
Océ | Control Panel
4-10
Follow these steps to print the Nozzle Print (see Figure 4-9):
1.
Navigate to:
MAIN MENU
operator
2.
Press the ACCEPT. You then see:
OPERATOR
print parameters
3.
Press MENU. You then see:
OPERATOR
test prints
4.
Press ACCEPT. You then see:
TEST PRINTS
nozzle print
5.
Press ACCEPT. You then see:
NOZZLE PRINT
(1 - 100) pass
Use the +/- buttons to select the number of passes from 1 to 100.
6.
Press ACCEPT. The Nozzle Print begins printing.