Oce Arizona 600 User Manual - page 48
of
148
Océ | Media System
3-20
8.
Ensure the media is aligned by lifting the leading edge of the media and align the left
edge exactly to the left edge of the media that goes over the front and under the take-
up dancer (see Figure 3-17).
Figure 3-17 Media Edges Aligned
9.
Engage the pinch roller handle. Only the left and right pinch rollers should touch both
the media and the drive roll. Raise up all other pinch rollers (see Figure 3-14 on page
3-11).
10.
Close the IR heater door fully and turn the lock and pull the handle to open the small
paper-feed access door below the heater (see Figure 3-18) and (see Figure 3-19).
Figure 3-18 Open Paper-Feed Access Door
Take-up
Leading Edge
Dancer
Align
Here
Door open
Handle/
lock