RADVision Scopia XT1000 Administrator's Manual - page 19
'Initial Configuration' | 13
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Installing and Enabling an Option License
Table 2-1
SCOPIA XT1000 Software Options
Procedure
Step 1
Open the envelope that you obtained when you bought an option, or refer to the e-mail you
received after purchasing your option.
Step 2
Locate the option key in the letter. Locate the serial number on the Codec Unit or the user code
you received with the purchase. You can also retrieve the user code and serial number in the
System Info page that appears when you press
on the Remote Control Unit.
Step 3
On a computer, open a browser and navigate to http://www.radvision.com/XT1000.
Step 4
Complete the online registration form and enter the serial number or the user code and the option
key. The Web registration form returns a license key.
Step 5
Write down the license key and keep it in a safe place for future use.
Step 6
Use the license key to enable the software or the option you bought. See
Enabling the License
from the Codec Unit Web Page page 9
or
Enabling the License from the Utilities Page page 12
.
Reference
Description
MCUs
55111-00002 SCOPIA XT1000 MCU4 Option Adds 4 way 720p embedded MCU
55111-00003 SCOPIA XT1000 MCU9 Option Adds 9 way 720p embedded MCU
55111-00012 SCOPIA XT1000 MCU4->9
MCU 4 to 9 Upgrade
Bandwidth and Network
55111-00004 SCOPIA XT1000 12MBPS
Option
Increases total bandwidth to 12Mbps
55111-00016 SCOPIA XT1000 2nd LAN port Enables 10/100 LAN port
SCOPIA Desktop
88111-00001 SCOPIA XT Desktop Option for
MCU4
To activate a SCOPIA XT Desktop 4 ports license,
you must have an MCU 4 port license.
88111-00002 SCOPIA XT Desktop Option for
MCU9
To activate a SCOPIA XT Desktop 9 port license, you
must have an MCU 9 port license.
88111-00003 Upgrade SCOPIA XT Desktop 4
to Desktop 9
SCOPIA XT Desktop 4 to 9 upgrade
SCOPIA Control
55111-00017 SCOPIA XT1000 Control
To control SCOPIA XT1000 using the SCOPIA Control
Application (iPad).