RADVision Scopia XT1000 Administrator's Manual - page 74
'Troubleshooting' | 68
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Figure 4-9
Landownload Start Screen
Download the package from RADVISION site to a Windows PC. Double click the package to
autoextract the Landownload program. In the interface of the landownload program enter the IP
address of the Codec Unit and press the Start button.
Software download will begin and the Recovery Mode screen will be updated with the progress
status.
CAUTION: Once the Start button is pressed, do not shut down the Codec Unit until download is
completed.
Figure 4-10
Update in Progress
If the download completes correctly, the recovery procedure ends and the Codec Unit reboots.
After rebooting, the regular user interface should be activated.
Note:
All the previous Codec Unit settings (except the Code of the Remote Control Unit) will be lost.
If the network connection fails, you will be prompted to repeat the download procedure by closing
and restarting the Landownload program and repeating
Step 5
of this procedure.