RADVision Scopia XT1000 Administrator's Manual - page 25
'Initial Configuration' | 19
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Step 3
In the General page set the fields as required.
Step 4
Press
Save.
Setting the Time Zone
You have set some of these fields in the Quick Setup screens as they belong to the minimal setting
requirements to have the system function properly. You may also modify these settings in this
page.
Procedure
Step 1
In the Administrator settings menu select System.
Step 2
Select Time zone.
Step 3
Set the fields as required.
Step 4
Press
Save.
Field Name
Description
Day
Enter the date.
Month
Enter the month.
Year
Enter the year.
Hour
Enter the hour.
Minutes
Enter the minutes.
Internet time
Synchronize the system clock with the network clock, thus allowing you
to align devices connected to the Internet.
Field Name
Description
Select the time zone to which the system belongs.
Enable daylight time
Set to Yes to enable energy savings.
Start (dd/mm)
Set the day and month of the current year when energy
saving will start.
Stop (dd/mm)
Set the day and month of the current year when energy
saving will stop.