RADVision Scopia XT1000 Administrator's Manual - page 31
'Initial Configuration' | 25
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
General Settings
You may also access this page from a previous screen in the configuration.
Procedure
Step 1
In the Administrator settings menu select I/O connections.
Step 2
Scroll to Monitor.
Step 3
Select the General page.
Step 4
Set the fields as required.
Step 5
Press
Save.
Field Name
Description
Number of monitors
Specifies how many monitors are connected to the Codec Unit. In case
of dual configuration, sets on which monitor the menu GUI will display.
HD1/HD2 - Single monitor configuration. One monitor is connected to
the HD1/HD2 output of the Codec Unit.
HD1 (Menu) + HD2 - Dual monitor configuration. The GUI will display
on the main monitor.
HD1 + HD2 (Menu) - Dual monitor configuration. The GUI will display
on the auxiliary monitor.
Resolution HD1/HD2
Defines how the Codec Unit sets the resolution of the connected main
monitor (HD1)/auxiliary monitor (HD2).
Dynamic - Adjusts the monitor resolution dynamically, taking into
account the maximum resolution of the monitor and the resolution of
the displayed video. This setting guarantees optimal visualization but
can introduce monitor flashing.
1080p - If the monitor supports 1080p, this setting will always keep the
monitor resolution at 1080p. In dual monitor configuration, a black
background could be visible around the displayed video.
720p - If the monitor supports 720p, this setting will always keep the
monitor resolution at 720p.
Mode HD1/HD2
Sets the operation mode of the main monitor (HD1)/auxiliary monitor
(HD2) depending on the type of video eqipment connected to the Codec
Unit.
auto - The Codec Unit automatically recognizes the type of connected
video equipment: HD or DVI.
HD - The Codec Unit only supports a HD video equipment.
DVI - The Codec Unit only supports a DVI video equipment.
Reset HD1/HD2
Select the arrow to reset the fields to their default settings.