RADVision Scopia XT1000 Administrator's Manual - page 50
'Initial Configuration' | 44
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Configuring LDAP Server Use
You can manage the directory using local and remote LDAP servers. The remote LDAP servers
(generic, remote SCOPIA XT1000, SCOPIA iVIEW) are accessed using the H.350 protocol.
Ask the LDAP remote server administrator for the values of the LDAP server fields:
1.
Base
2.
Filter
3.
User. For the SCOPIA XT1000 remote server, the server administrator defines the User. For
the SCOPIA iVIEW, the User must be agreed upon with the iVIEW server administrator. For the
remote generic LDAP server, all parameters must be agreed upon with the server
administrator.
4.
For a connection to a generic LDAP server, the server administrator must match some
characteristics of expected database structure. All data related to the terminals should be
stored in the objects h323Identity and SIPidentity.
Note:
When the terminal is under the management of iVIEW, the remote iVIEW management system sets
some parameters (e.g.: Gatekeeper address and LDAP server).
This page allows you to add, modify or delete LDAP remote servers by pressing the relevant
function key. The local LDAP server is embedded in the Codec Unit and cannot be deleted.
When pressing
Modify server, you can modify parameters related to an existing link to a
server.
When pressing
Delete server, you can delete a stored link to a server.
Procedure
Step 1
In the Administrator settings menu select System.
Step 2
Scroll to LDAP.
Step 3
Select the General page.
Step 4
Add the LDAP remote server by pressing Add server. The Codec Unit has an embedded local
LDPAP server. It is the local agenda. The remote LDAP server must be connected to keep the
enterprise directory agenda, or the agenda of another remote SCOPIA XT1000 LDAP server.