RADVision Scopia XT1000 Administrator's Manual - page 55
'Initial Configuration' | 49
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Configuring Call Properties
When configuring the settings the system will use for in call transmission, take into account the
remote terminal capabilities.
General Settings
Procedure
Step 1
In the Administrator settings menu select Calls.
Step 2
Scroll to Preferences.
Step 3
Select the General page.
Step 4
Set the fields as required.
Note:
The default setting indicates that the system will always try to choose the best
option for the local situation.
Step 5
Press
Save.
Field Name
Description
Rate K (IP)
Sets the maximum call rate that the system will use for all
incoming or outgoing calls.
Audio Coding (IP)
Sets the preferred Audio Coding that the system will try to use
for all incoming or outgoing calls, if the remote system supports
the same Audio Coding.
Video Coding (IP)
Sets the preferred Video Coding that the system will try to use
for all incoming or outgoing calls, if the remote system supports
the same Video Coding.
Rate K (ISDN)
Sets the maximum call rate that the system will use for all
incoming or outgoing calls in ISDN connectivity . For ISDN
configuration, see
Configuring ISDN Connectivity page 46
.