RADVision Scopia XT1000 Administrator's Manual - page 26
'Initial Configuration' | 20
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Setting Regional Data
You have set some of these fields in the Quick Setup screens as they belong to the minimal setting
requirements to have the system function properly. You may also modify these settings in this
page.
Procedure
Step 1
In the Administrator settings menu select System.
Step 2
Select Location.
Step 3
In the General page set the fields as required.
Step 4
Press
Save.
Field Name
Description
System name
Enter the name that will appear in the local terminal GUI and in the
remote terminal GUI (if connected).
Country
Select the country in which the local system is located. Once the
country is selected, the other fields are automatically set up.
Language
Select the language used in the GUI.
Audio coding
Select the European or US coding.
Video frequency
The video refresh frequency depends on the country, and may assume
the values of 50Hz or 60Hz. The user may select the video frequency
automatically or manually. If set to automatic, the system will assign
the value depending upon the selected country. In Japan, the frequency
depends on the country area (east or west); thus in Japan the system
administrator must select manually the correct value related to the
geographic location.