RADVision Scopia XT1000 Administrator's Manual - page 24

'Initial Configuration' | 18

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Setting the Administrator/User Password

Set/change passwords for both User and Administrator. The default password is 1234. We 

recommend to change the administrator password when starting the system configuration to 

prevent users from inadvertently changing the settings.

Procedure

Step 1

From the Main Menu page scroll to Settings and press 

 Administrator settings. Enter the 

administrator password.

Step 2

Scroll to Utilities.

Step 3

Select Password. 

Step 4

Select the Administrator or User tab.

Step 5

Enable password use. Then, enter the old password, new password, and confirm the new 

password.

Setting System Preferences

Setting Date and Time

You have set some of these fields in the Quick Setup screens as they belong to the minimal setting 

requirements to have the system function properly. You may also modify these settings in this 

page.

Procedure

Step 1

In the Administrator settings menu select System.

Step 2

Select Date - time.