RADVision Scopia XT1000 Administrator's Manual - page 21
'Initial Configuration' | 15
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
•
Contrast, Brightness and Sharpness of the monitor can be configured in self-view, in order to
define the display settings in optimal conditions.
•
If available, true pixel-to-pixel representation for Full HD resolution usually gives the better
results.
•
Dynamic Noise Reduction, if available, may give a sharper quality of the image.
•
Viewing mode (Cinema or Movie), if available, may increase the visual experience.
For further monitor configuration, see
Configuring the Monitor page 24
.
Procedure
Step 1
If all the sides of the orange frame are visible on your monitor, select
Yes, otherwise select
No.
Step 2
Select
. The first slider is highlighted in orange. Use the right and left arrow keys to move the
slider until the Top orange frame is fully visible on your monitor. Move to a different slider with
the up and down arrow keys and press
to move the slider with the right and left arrow keys.
Repeat the procedure for the Left, Bottom, and Right side.
Step 3
Press
Next.