RADVision Scopia XT1000 Administrator's Manual - page 39
Other manuals for Scopia XT1000:
Administrator's Manual, Quick Setup Manual, User Manual, User Manual
of
79
'Initial Configuration' | 33
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Procedure
Step 1
In the Administrator settings menu select Networks.
Step 2
Scroll to Preferences.
Step 3
Select the Dynamic Ports page.
Step 4
Set the fields as required.
Field Name
Description
Auto detect
Setting to No means the Codec Unit uses the indicated ports. Setting to Yes
means the Codec Unit uses ports in random mode. Recommended setting
is auto-detect set to No (default).
Ports
Sets the range of TCP and UDP ports the system will use. The range spans
from the number you enter to the number displayed in the GUI. See the
Public Port List table for default values.
The H.323/SIP signaling and media ports are programmable.