RADVision Scopia XT1000 Administrator's Manual - page 44
'Initial Configuration' | 38
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Procedure
Step 1
In the Administrator settings menu select Networks.
Step 2
Scroll to Preferences.
Step 3
Select the QoS page.
Step 4
Set the fields as required.
Step 5
Press
Save.
Configuring GLAN/LAN Properties
Configuring Network Addresses
Procedure
Step 1
In the Administrator settings menu select Networks.
Step 2
Scroll to GLAN/LAN.
Step 3
Select the Addresses page.
Field Name
Description
Use QoS
Enable/Disable QoS. If you set Use QoS to Yes, you will provide different
priority to different data stream, or guarantee a certain level of
performance to a data stream. In particular, you may choose between
Precedence/TOS and Differentiated Service.
Quality of service
Precedence/TOS - For each stream (Audio, Video, Data, Signal) sent to
the system, you may define the Type Of Services and a Precedence to fit
network capabilities. Precedence is priority. A higher number sets a higher
priority. Used mainly to class router packets as high priority.
Differentiated Service - For each stream (Audio, Video, Data, Signal)
sent to the system, you may define a priority level to fit network
capabilities.