RADVision Scopia XT1000 Administrator's Manual - page 67

'Maintenance Tasks' | 61

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Step 4

Set the fields as required.

Note:

To configure the network, contact your network administrator.

Step 5

Press  

Save.

Importing/Exporting Configuration Files

When these settings are set to Yes, RADVISION iVIEW SCOPIA Management Suite can get and install 

configuration files. 

Procedure

Step 1

In the Administrator settings menu scroll to Utilities.

Step 2

Select Remote access.

Step 3

Select the Configurations page.

Field Name

Description

SNMP management

Enables/disables SNMP use.

Administrator name

Enter the name of the administrator in charge of managing the SCOPIA 

XT1000 using SNMP.

Location

Enter the SCOPIA XT1000 location.

Community

Enter the name of the SNMP community that will support the read and 

write operations of SNMP management. iVIEW Communications Manager 

(iCM) requires the name to communicate with the gateway in the SNMP 

Get/Set Community fields. Private is the default community for Edit. 

Public is the default community for Read. 

Enable all addresses

If set to Yes, allows editing/reading of settings by any IP address on a 

specified network. If set to No, configure Address and SubNet mask.

Address

Limits editing/reading of settings to one IP address on a specified 

network.

SubNet mask

Enter the SubNet mask associated with the IP address.