RADVision Scopia XT1000 Administrator's Manual - page 30

'Initial Configuration' | 24

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Configuring Other Video Equipment

You may also access this page from a previous screen in the configuration.

Procedure

Step 1

In the Administrator settings menu select I/O connections.

Step 2

Scroll to Cameras.

Step 3

Select the DVI page. 

Step 4

Set the fields as required.

Note:

You may connect a camera to the DVI-I input, but it will be managed as PC content.

Step 5

Press  

Save.

Configuring the Monitor

Note:

You can return to the Default Auto settings at any time by holding down simultaneously 

 and 

.

Field Name

Description

Enable 

Enables/disables the DVI input.

Name

Enter the input name. The selected name will appear in the system area 

of the display in addition to the input icon.

Contrast

Sets black level.

Brightness

Sets brightness level.

Auto Adjust

In case of graphic issues, automatically adjusts the incoming image to 

display correctly on the screen.

Reset

In case of issues when connecting a PC to the system, resets the settings 

in this page.