RADVision Scopia XT1000 Administrator's Manual - page 27

'Initial Configuration' | 21

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Pairing a XT1000 Remote Control Unit with a Codec Unit

You can use the Remote Control Unit to control one or more systems in a same room, thus avoiding 

interferences with other Remote Control Units. To do so, enter the same code in your Remote 

Control Unit and in your system software. All Remote Control Units are supplied with a default 

code (01).

Procedure

Step 1

On the Main Menu page, scroll to Settings.

Step 2

Press  

User settings. The General page appears on the display. 

Step 3

Using the arrow keys, scroll to Remote control code and type a two-digit code in the field. The 

allowed range of code is between 01 and 99.

Step 4

Press  

Save.

Step 5

Simultaneously press 

 and 

. The 

 button becomes red.

Step 6

Using the keypad, type the two-digit code you just entered in the Remote control code field.

Step 7

Press  

Finish.