D-Link DWL-2600AP User Manual - Time Zone Configuration
Configuring SNTP Settings
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 103
D-Link UWS User Manual
• Click
Refresh
to display the latest information from the router.
Time Zone Configuration
Use the Time Zone Configuration page to configure the time zone difference from Coordinated Universal Time
(UTC).
To display the Time Zone Configuration page, click
LAN >
Administration > SNTP
Time Zone Configuration
in the navigation menu.
Figure 34: Time Zone Configuration
• If you change any of the settings on the page, click
Submit
to apply the changes to system.
Address Type
Specifies the address type of the SNTP Server address for the last received valid
packet.
Server Stratum
Specifies the claimed stratum of the server for the last received valid packet.
Reference Clock Id
Specifies the reference clock identifier of the server for the last received valid packet.
Server Mode
Specifies the mode of the server for the last received valid packet.
Unicast Sever Max
Entries
Specifies the maximum number of unicast server entries that can be configured on
this client.
Unicast Server Current
Entries
Specifies the number of current valid unicast server entries configured for this client.
Broadcast Count
Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.
Table 29: Time Zone Configuration Fields
Field
Description
Hours-offset
Set the hours difference from UTC. (Range: -12 to +13)
Minutes-offset
Set the minutes difference from UTC. (Range: 0–59
Zone
Set the acronym of the time zone. (Range: 0–4 characters)
Table 28: Global Status Fields (Cont.)
Field
Description