D-Link DWL-2600AP User Manual - Wds Ap Link Status Summary
Monitoring Status and Statistics
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 536
D-Link UWS User Manual
Command Buttons
The page includes the following button:
•
Refresh
—
Updates the page with the latest information.
WDS AP Link Status Summary
The
WDS AP Link Status Summary
page displays summary information about the link configuration and link
state in a WDS group.
Figure 354: WDS AP Link Status Summary
The following table describes the fields on the
WDS AP Link Status
Summary
page.
Note:
The WDS links are bidirectional. The terms
Source
and
Destination
simply reflect the WDS link
endpoints specified in the WDS group configuration.
Table 322: WDS AP Link Status Summary
Field
Description
WDS AP Group ID
The group number that identifies the configured WDS AP group.
Source MAC Address
The MAC address of one end-point of the WDS link
Radio Source
The radio number of the WDS link endpoint on the source AP.
Destination MAC
Address
The MAC address of the Source AP in the group.
Destination Radio
The radio number of the WDS link endpoint on the destination AP.
Source End-Point
Detected
Indicates whether the AP specified by the destination MAC detected the AP specified
by the source MAC.
Destination End-Point
Detected
Indicates whether the AP specified by the source MAC detected the AP specified by
the destination MAC.
Aggregation Mode
When parallel links are defined between two APs, this field indicates whether this
link is part of the aggregation link pair.