D-Link DWL-2600AP User Manual - page 186
Managing VLANs
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 186
D-Link UWS User Manual
• If you make any changes to the page, click
Submit
to apply the changes to the system. To delete a VLAN,
select the VLAN from the
VLAN ID and Name
field, and then click
Delete
. You cannot delete the default
Participation
Use this field to specify whether a port will participate in this VLAN. The
factory default is “Autodetect.” The possible values are:
•
Include:
This port is always a member of this VLAN. This is equivalent to
registration fixed in the IEEE 802.1Q standard.
•
Exclude:
This port is never a member of this VLAN. This is equivalent to
registration forbidden in the IEEE 802.1Q standard.
•
Autodetect:
Specifies that port may be dynamically registered in this VLAN
via GVRP. The port will not participate in this VLAN unless it receives a
GVRP request. This is equivalent to registration normal in the IEEE 802.1Q
standard.
Tagging
Select the tagging behavior for this port in this VLAN. The factory default is
'Untagged'. The possible values are:
•
Tagged
: All frames transmitted for this VLAN will be tagged.
•
Untagged
: All frames transmitted for this VLAN will be untagged.
VLAN Name
Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters long, including blanks. The default is blank. VLAN ID
1 always has a name of 'Default'.
VLAN ID-Individual/Range
Specify the VLAN Identifier for the new VLAN. (You can only enter data in this
field when you are creating a new VLAN.)Specify the VLAN Identifiers for the
VLANs being created or deleted. Single or Multiple VLANs can be specified at
once. This field can accept single VLAN ID or range of VLAN IDs or a
combination of both in sequence separated by ','. You can specify individual
VLAN ID. Eg: 10 You can specify the VLAN range values separated by a '-'. E.g.
10-13 You can specify the combination of both separated by ','. Eg: 12,15,40-
43,1000-1005,2000 The range of the VLAN ID is (2 to 4093)
VLAN Name
Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters long, including blanks. The default is blank. VLAN ID
1 always has a name of 'Default'.
VLAN ID
Use this field to specify VLAN to participate. The range of the VLAN ID is (1 to
4093)
VLAN Participation All
Use this field to specify VLAN to participate on all the interfaces. By default,
the field is disabled. Set the checkbox to enable the field.
VLAN Participation
Use this field to specify VLAN to participate. By default, the field is disabled.
Set the checkbox to enable the field.
Convert VLAN Type to Static
Use this field to Convert 'Dynamic' VLAN to 'Static'. A VLAN that is created by
GVRP registration initially has a type of 'Dynamic'. By default, the field is
disabled. Set the checkbox to enable the field.
VLAN Type
This field identifies the type of the VLAN you are configuring. You cannot
change the type of the default VLAN (VLAN ID = 1): it is always type 'Default'.
When you create a VLAN, using this screen, its type will always be 'Static'. A
VLAN that is created by GVRP registration initially has a type of 'Dynamic'.
Interface
Indicates which port is associated with the fields on this line.
Status
Indicates the current value of the participation parameter for the port.
Table 81: VLAN Configuration Fields (Cont.)
Field
Description