D-Link DWL-2600AP User Manual - Traceroute
TraceRoute
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 96
D-Link UWS User Manual
TraceRoute
You can use the TraceRoute utility to discover the paths that a packet takes to a remote destination.
To display this page, click
LAN > Administration > TraceRoute
in the navigation tree.
Figure 29: TraceRoute
• Click
Submit
to initiate the traceroute. The results display in the TraceRoute box.
Table 24: TraceRoute Fields
Definition
Hostname/IP Address
Enter the IP address or the hostname of the station you want the switch to discover
path for.
Probes Per Hop
Enter the number of times each hop should be probed.
MaxTTL
Enter the maximum time-to-live for a packet in number of hops.
InitTTL
Enter the initial time-to-live for a packet in number of hops.
MaxFail
Enter the maximum number of failures allowed in the session.
Interval
Enter the time between probes in seconds.
Port
Enter the UDP destination port in probe packets.
Size
Enter the size of probe packets.
TraceRoute
Displays the output from a traceroute.