D-Link DWL-2600AP User Manual - page 208

Configuring GARP

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 208

D-Link UWS User Manual

• If you make any changes to the page, click 

Submit

 to apply the changes to the system.

GARP Leave Timer (centisecs)

Displays time lapse, in centiseconds, that the switch waits before leaving its 

GARP state. Leave time is activated by a Leave All Time message sent/

received, and cancelled by the Join message received.This allows time for 

another station to assert registration for the same attribute in order to 

maintain uninterrupted service. Enter a number between 20 and 600 (0.2 to 

6.0 seconds). Leave time must be greater than or equal to three times the join 

time. The factory default is 60 centiseconds (0.6 seconds). An instance of this 

timer exists for each GARP participant for each port. 

GARP Leave All Timer 

(centisecs)

Displays time lapse, in centiseconds, that all switches wait before leaving the 

GARP state. The leave all time must be greater than the leave time

. 

The 

possible field value is 200-6000. The default value is 1000 centisecs. The Leave 

All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU 

indicates that all registrations will shortly be deregistered. Participants will 

need to rejoin in order to maintain registration. The Leave All Period Timer is 

set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. The 

timer is specified in centiseconds. Enter a number between 200 and 6000 (2 

to 60 seconds). The factory default is 1000 centiseconds (10 seconds). An 

instance of this timer exists for each GARP participant for each port.

Table 100:  GARP Port Configuration Fields (Cont.)

Field

Description