D-Link DWL-2600AP User Manual - Cp Configuration
Captive Portal Configuration
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 386
D-Link UWS User Manual
CP Configuration
From the CP Configuration page, you can view summary information about captive portals on the system, add
a captive portal, and configure existing captive portals.
Use the
CP Summary
page to create or delete captive portal configurations. The switch supports 10 CP
configurations. CP configuration 1 is created by default and can not be deleted. Each captive portal
configuration can have unique guest or group access modes and a customized acceptance use policy that
displays when the client connects.
To view summary information about existing captive portals, or to add or delete a captive portal, click
LAN >
Security > Captive Portal > CP Configuration
.
Figure 260: Captive Portal Summary
To create a CP configuration, enter the configuration name in the text box and click
Add
. After you add the
configuration, the CP Configuration page for that configuration appears and a new tab with the name of that
configuration is created.
To delete an existing CP, select the check box for the CP to remove, and then click
Delete
.
To configure the settings for an existing CP, click the name in the Configuration column or click the appropriate
tab.
CP Summary
page.
Note:
In this document, the names captive portal or CP or portal are sometimes used in place of CP
Configuration.
Table 224: Captive Portal Summary
Field
Description
Configuration
Shows the captive portal ID and name. To access the configuration page for an exiting
CP, click the configuration name.
Mode
Shows whether the CP is enabled.