D-Link DWL-2600AP User Manual - page 588
AP Management
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 588
D-Link UWS User Manual
Command Buttons
The page includes the following button:
•
Refresh
—Updates the page with the latest information.
Adjusting the Channel and Power
Changes you make to the channel and power are runtime changes only. If you change the channel or power
settings, the new settings are lost if the AP or switch is reset.
Figure 376: Managed
AP Debug
appear when you click the current channel or power setting for an AP on
the
Managed AP Advanced
page.
Confirm Password
Since the password is encrypted, you must retype the password to confirm the
password.
Enable Debug
Select or clear the
Enable
check box to enable or disable debugging.
Once once you Telnet to the AP, you get an AP interface login prompt. The user name
is admin. Enter the password you set in the previous field. The default password is
admin if you did not specify a new password. From the AP CLI, you can also access
the standard Linux prompt by typing the '!' character.
You can issue the following debug commands at the Linux OS prompt:
•
get management
: Display management interface information
•
get managed-ap
: Display managed AP information
You can issue the following debug commands at the Linux OS prompt:
•
ifconfig
: display all interfaces.
•
cat /proc/meminfo
: View memory utilization
Table 344: Managed AP Debug
Field
Description