D-Link DWL-2600AP User Manual - page 169
Using System Tools
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 169
D-Link UWS User Manual
Section 3: Using System Tools
The Tools menu contains links to the following Web pages that help you perform switch maintenance:
•
“Reset Configuration to Defaults”
•
•
•
•
“Download File To Switch (TFTP)”
•
•
“Upload File From Switch (TFTP)”
•
•
•
Reset Configuration to Defaults
Use the Reset Configuration to Defaults page to reset the system configuration to the factory default values.
To access the Reset Configuration to Defaults page, click
Tool > Reset Configuration
in the navigation tree.
Figure 82: Reset Configuration to Defaults
• Click
Reset
to restore the factory default settings. The screen refreshes and asks you to confirm the reset.
Click
Reset
again to complete the action.
Note:
By default, the switch IP address is 10.90.90.90 and the DHCP client is disabled. When you reset
the system to its default values, the network IP address resets to 10.90.90.90. For information about
configuring network information, see
âConnecting the Switch to the Networkâ on page 43
.