D-Link DWL-2600AP User Manual - page 735
Detecting and Preventing Wireless Intrusion
D-Link
Unified Wired and Wireless Access System
July 2012
Page 735
D-Link UWS User Manual
2.
On the
WLAN > Administration > Advanced Configuration > Clients > Known Clients
page, type the MAC
addresses of a tablet PC into the available field.
3.
Click
Add
.
The
Known Client Configuration
page appears.
The default authentication action is Global Action, which means the switch uses the white-list
authentication mode as specified on the
Wireless Global Configuration
page. Only the MAC addresses in
the Known Client database are marked as Known Clients.
4.
Specify a name to identify the client in the
Name
field
5.
Click
Submit
.
6.
Repeat
–
until all allowed clients are in the Known Clients database.
7.
To configure the client-based WIDS security tests and enable the client threat mitigation feature, go to the
WLAN > Administration > Advanced Configuration > WIDS Security > Client Configuration
page and
configure the following settings:
a. Set the Known Client Database Test to Enable
b. Set Authentication with Unknown AP Test to Enable
c. Set Client Threat Mitigation to Enable