D-Link DWL-2600AP User Manual - page 291
Configuring ARP
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 291
D-Link UWS User Manual
The ARP Table displays at the bottom of the page, and contains the following fields:
• If you make any changes to the page, click
Submit
to apply the changes to the system.
Peak Total Entries
Highest value reached by Total Entry Count. This counter value is restarted
whenever the ARP table Cache Size value is changed.
Active Static Entries
Total number of active static entries in the ARP table.
Configured Static Entries
Total number of configured static entries in the ARP table.
Maximum Static Entries
Maximum number of static entries that can be defined.
Remove from Table
Allows you to remove certain entries from the ARP Table. The choices listed
specify the type of ARP Entry to be deleted:
• All Dynamic Entries
• All Dynamic and Gateway Entries
• Specific Dynamic Gateway Entry
• Specific Static Entry
Remove IP Address
This field appears only if you select Specific Dynamic/Gateway Entry or
Specific Static Entry in the Remove from Table menu. This field allows you to
enter the IP Address against the entry that is to be removed from the ARP
Table.
Table 169: ARP Table Fields
Field
Description
IP Address
The IP address of a device on a subnet attached to one of the switch's routing interfaces.
MAC Address
The unicast MAC address for the device. The format is six two-digit hexadecimal numbers
separated by colons, for example 00:06:29:32:81:40.
Slot/Port
The routing interface associated with the ARP entry.
Type
The type of the ARP entry.
Age
Age since the entry was last refreshed in the ARP Table. The format is hh:mm:ss
Table 168: ARP Table Configuration Fields (Cont.)
Field
Description