D-Link DWL-2600AP User Manual - Verifying The Configuration
Configuring a Network to Use WPA2-Enterprise and Dynamic
VLANs
D-Link
Unified Wired and Wireless Access System
July 2012
Page 713
D-Link UWS User Manual
Verifying the Configuration
This section describes the pages available for monitoring information the managed AP and its associated
clients.
1.
Verify that the AP is now managed by the switch.
Click
WLAN > Monitoring > Access Point > Managed AP Status
and verify that the AP_1 status is Managed
and the Configuration status is Success.
2.
Verify that the
engineer
user can connect to the Corporate network and is assigned to VLAN 20.
a. Use a wireless client to access the wireless network with the
Corporate
SSID.
b. When prompted for the username and password, enter engineer for both fields.
c. To verify the VLAN assigned to the
engineer
user, go to the
WLAN > Monitoring > Client > Associated
Clients
page and select the MAC address of the client Note the VLAN of the
engineer
user is VLAN 20,
the default VLAN for the VAP.