D-Link DWL-2600AP User Manual - Radio Configuration

Basic Setup

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 549

D-Link UWS User Manual

Radio Configuration

In order to accommodate a broad range of wireless clients and wireless network requirements, the 

DWL-8600AP and DWL-6600AP support two radios. Radio 1 can broadcast in one of the following modes:

• IEEE 

802.11a

 mode

• IEEE 

802.11a

 and IEEE 802.11n modes

• 5 GHz IEEE 802.11n mode

Radio 2 can broadcast in one of the following modes:

• IEEE 802.11b and IEEE 802.11g modes

• IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n modes

• 2.4 GHz IEEE 802.11n mode

The DWL-3600AP supports one radio that can broadcast in one of the following modes:

• IEEE 802.11b and IEEE 802.11g modes

• IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n modes

• 2.4 GHz IEEE 802.11n mode

You configure the default radio settings from the 

WLAN > Basic Setup > Radio

 tab, which the following figure 

shows.

Figure 359:  Radio Settings

The DWL-3600AP is a single-radio AP. Any settings you configure for Radio 1 (802.11a/n) are not 

applied to the DWL-3600AP.