D-Link DWL-2600AP User Manual - Ip Statistics
Configuring Global and Interface IP Settings
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 297
D-Link UWS User Manual
IP Statistics
The statistics reported on the IP Statistics page are as specified in RFC 1213.
To display the page, click
LAN > Monitoring > L3 Status > IP Statistics
in the navigation tree.
Figure 189: IP Statistics
Note:
does not show all of the fields on the page.
Table 173: IP Statistics Fields
Field
Description
IpInReceives
The total number of input datagrams received from interfaces, including
those received in error.
IpInHdrErrors
The number of input datagrams discarded due to errors in their IP headers,
including bad checksums, version number mismatch, other format errors,
time-to-live exceeded, errors discovered in processing their IP options, etc.
IpInAddrErrors
The number of input datagrams discarded because the IP address in their IP
header's destination field was not a valid address to be received at this entity.
This count includes invalid addresses (e.g., 0.0.0.0) and addresses of
unsupported Classes (e.g., Class E). For entities which are not IP Gateways and
therefore do not forward datagrams, this counter includes datagrams
discarded because the destination address was not a local address.
IpForwDatagrams
The number of input datagrams for which this entity was not their final IP
destination, as a result of which an attempt was made to find a route to
forward them to that final destination. In entities which do not act as IP
Gateways, this counter includes only those packets which were Source-
Routed via this entity, and the Source-Route option processing was successful.
IpInUnknownProtos
The number of locally-addressed datagrams received successfully but
discarded because of an unknown or unsupported protocol.
IpInDiscards
The number of input IP datagrams for which no problems were encountered
to prevent their continued processing, but which were discarded (e.g., for lack
of buffer space). Note that this counter does not include any datagrams
discarded while awaiting re-assembly.