D-Link DWL-2600AP User Manual - Managed Ap Status

Monitoring Status and Statistics

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 464

D-Link UWS User Manual

Command Buttons

The page includes the following button:

•

Delete All 

—Manually clear all APs from the All Access Points status page except Managed Access Points.

•

Manage — 

Configure an Authentication Failed AP to be managed by the switch the next time it is 

discovered. Select the check box next to the MAC address of the AP before you click 

Manage 

You will be 

presented with the Valid Access Point Configuration page. You can then configure the AP and click 

Submit

to save the AP in the local Valid AP database. If you use a RADIUS server for AP validation, you must add 

the MAC address of the AP to the AP database on the RADIUS server.

•

Acknowledge — I

dentify an AP as an Acknowledged Rogue. Select the check box next to the MAC address 

of the AP before you click 

Acknowledge

. The switch adds the AP to the Valid AP database as an 

Acknowledged Rogue.

•

Refresh

—Updates the page with the latest information.

Managed AP Status

From the 

WLAN > Monitoring > Access Point > Managed AP Status 

page, you can access a variety of 

information about each AP that the switch manages. The pages you access from the 

Status

 tab provide 

configuration and association information about managed APs and their neighbors. The pages you access from 

the 

Statistics

 tab display information about the number of packets and bytes transmitted and received on 

various interfaces.

Radio

Shows the wireless radio mode the AP is using. 

Channel

Shows the operating channel for the radio.

Authenticated Clients

Shows the number of wireless clients that are associated and authenticated with the 

access point per radio.

Note: 

Some status values for some APs in the All Access Points list are not available. Those are listed 

as N/A.

Note: 

You can sort the list of APs by any of the column heading except for Radio, Channel, and 

Authenticated Clients. For example, to sort the APs by the profile they use, click Profile.

Table 268:  Monitoring All Access Points (Cont.)

Field

Description